Menü überspringen

TNC 320

Request

Specifications

Components

  • Main computer with TNC keyboard and integrated 15.1-inch TFT color flat-panel display with soft keys

Operating system

  • HEROS 5 real-time operating system for machine control

Memory

  • 1.8 GB (on compact flash memory card CFR)

Input resolution and display step

  • Linear axes: up to 0.1 µm
  • Angular axes: to 0.0001°

Input range

  • Maximum 99 999.999 mm or 99 999.999°

Interpolation

  • Linear in 4 axes
  • Circular in 2 axes
  • Circular in 3 axes with tilted working plane
  • Helical: superimposition of circular and straight paths

Block processing time

  • 3 ms (3-D straight line without radius compensation)

Axis feedback control

  • Position resolution: Signal period of the position encoder/1024
  • Cycle time of position controller: 3 ms

Range of traverse

  • Maximum 100 m

Spindle speed

  • Maximum 100 000 rpm (analog speed command signal)

Error compensation

  • Linear and nonlinear axis error, backlash, reversal spikes during circular movements, thermal expansion
  • Static friction, reversal error, sliding friction

Data interfaces

  • RS-232-C/V.24 max. 115 Kbps
  • Extended data interface with LSV2 protocol for remote operation of the TNC 320 over the data interface with the HEIDENHAIN software TNCremo or TNCremoPlus
  • Gigabit Ethernet interface 1000BASE-T
  • 3 x USB (1 x front USB 2.0; 2 x rear USB 3.0)

Diagnostics

  • Fast and simple troubleshooting through integrated diagnostic aids

Ambient temperature

  • Operation: 0 °C to +45 °C
  • Storage: –20 °C to +60 °C